Rivarossi HO Scale 2-8-2 Great Northern 4-6-2 crescent

Rivarossi 2-8-2 Great Northern 4-6-2 crescent. The first engine is the 2-8-2 this engine runs good.

It is missing the front of the boiler where the headlight goes as shown in the pics it is missing a rear left hand rail. And the right rear hand rail is loose. The tender for this engine has a missing latter on the rear left of the tender. Also a piece of the deck on the rear left of the tender is broken and will need to be glued.

The 4-6-2 crescent engine runs but has to use full. Power to get it to run with the great northern tender. And the motor gets really hot so I stopped running it. The engine side rod screws are probably loose because they came out a few times and I don't have a wrench small enough to really tighten them down so they are just hand tight right now but the engine did run with them hand tight. The steps and the cow catcher broke off as shown in the pics I also have them. Some one tried to glue them back on as they are covered in dry glue. This engine is also missing the rear hand rails.

The tender for this engine is missing the part that connects it to the engine and the wheels on the rear truck of the engine keep falling off, so I just removed them and they will also be sent with the engine. The rear truck on the engine has been glued back together but it causes the engine to get stuck on switches if your layout has switches and lastly one of the motor mounts is broken but your are still able to tighten it down but the screw is not holding on by much. This item is in the category "Toys & Hobbies\Model Railroads & Trains\Railroads & Trains\Locomotives".

The seller is "j-and-m-rc" and is located in this country: US. This item can be shipped to United States.

• Brand: Rivarossi
• Type: Steam Locomotive
• Wheel Configuration: 4-6-2
• Gauge: HO